Project Blues - case mod

[Wickerman]

Well im working on a case mod, and i used a lot of the images here for reference, so i figured id show the fruits of my labor so far:

http://www.spline-designs.com/members/BB1-2.jpg
My design drawn out, and a little bit of cut work done.

http://www.spline-designs.com/members/BB3-4.jpg
I ran out of cut off disks so had to run up to Home Depot to buy some more, i had a few heavy duty ones left but those things wear out FAST on this thick metal. Then you see the final cut out.

http://www.spline-designs.com/members/BB5.jpg
This panel is NOT for the case that i am showing it on, i mearly put it on there to see what it looks like under some blue cold cathodes. Elwood is done, Jake goes on the other side

For the top i will be putting in a large rounded rectangular window, and on the front i will be installing an old speedometer and rpm guage. I may try to wire them up, and have 1 measure cpu load, and other measure memory usage, we'll have to see